Operator´s Manual
1000-095-071-EN Rev. 1.1
OMNERA®
2020-09-14
Page 81
3.2.13 Grid Status
The grid status is indicated in the OTC display and in the Canon NE user interface for guid-
ance. There is also a pop-up window appearing in the Canon NE user interface if grid status
needs to be adjusted.
It is possible to perform exposure without adjsuting the grid status according to the informa-
tion in the pop up window. Please note that performing exposure with incorrect grid status
might affect the image quality negative.
The grid status is shown in the upper right corner of the Canon NE user interface.
When the correct grid is attached the grid name is written with black letters, see Fig. 3-32.
When a grid is not needed for the examination "Removed" is shown with black letters in the
same location, see Fig. 3-32.
When a correction of grid status is needed this is indicated with red text in the Canon inter-
face, see detailed description in Table 3-1
Fig. 3-31 Canon NE user interface. Grid data displayed.
Removed
Fig. 3-32 Canon NE user interface. Grid removed.
