manualshive.com logo in svg

Canon Oce VarioPrint 6000+ Series, Operation Manual, Page: 148 / 222

Share
Download
Canon Oce VarioPrint 6000+ Series Operation Manual Download Page 148

Step

Actions on the print‐
er

Actions on the host

Remarks

3

Change the active
PDL when currently
the wrong PDL is ac-
tive. This is only pos-
sible when you have
licenses for more
than 1 PDL.

Via the Settings Editor: [Transac-
tion printing] -> [Setups] -> [Re-
quested active PDL].

4

Load the required
media into the paper
trays.

Only required when the active set-
up has set the tray mode to tray to
tray.

5

Put the printer on-
line.

• Via the operator panel: [System]

-> [Transaction] -> [Transaction
online] -> [On], or

• Via the Settings Editor: [Trans-

action printing] -> [Settings] ->
[Switch the printer online or off-
line].

6

Connect to the printer.

7

Submit the transaction
print jobs.

8

Print the transaction
print jobs.

You must perform all the regular
activities, for example load the
media, empty the output locations,
add the supplies and solve errors.

9

Put the printer off
line when the trans-
action print jobs are
ready.

• Via the operator panel: [System]

-> [Transaction] -> [Transaction
online] -> [Off], or

• Via the Settings Editor: [Trans-

action printing] -> [Settings] ->
[Switch the printer online or off-
line].

10

Switch the printer
back to the docu-
ment printing mode.

• Via the operator panel: [System]

-> [Transaction] -> [Transaction
printing mode] -> [Off].

Introduction to the [Transaction] section

148

Chapter 7 - Carry out print jobs

Summary of Contents for Oce VarioPrint 6000+ Series































































































































































































































Reviews:

No comments