Océ VarioPrint 135/120/110 Service Guide
Revision 3
Table 17 – Power Receptacle
ePIM
F. Installation Weight & Dimensions
The approximate weight and dimensions differ depending on how the device
is configured with the optional accessories. The following table includes the
weight, width, height, and depth dime
accessories.
Table 18 – Weight Table
Main Unit
19F
Duplex Color Image Reader
Operator Panel
Operator Attention Light
ePIM-C1
Document Insertion Unit
Saddle Finisher-AF2
Finisher-AF1
High Capacity Stacker
High Capacity Stacker
Paper Folding Unit-F1
Puncher Unit-BQ1
Booklet Trimmer-D1
Two-Knife Booklet Trimmer
IMPORTANT
The floor on which this machine is installed must have strength of at least 450
kg/m² (92.2 lb/ft
2
). If the floor does not have this
building contractor before installing the machine.
20
The Marking Engine, Fixing Unit, and Power Station Unit all make up what is hereinafter referred to as the “Main Unit.”
Océ VarioPrint 135/120/110
Service Guide
Receptacle
VarioPrint 135/120/110 Main Unit
NEMA 6-20 R
ePIM-C1 / Accessories / Finishers / PRISMAsync Controller
NEMA 5-15R
Weight & Dimensions
The approximate weight and dimensions differ depending on how the device
is configured with the optional accessories. The following table includes the
weight, width, height, and depth dimensions of the main engine and optional
Table
Accessory
580 lb
Duplex Color Image Reader-D1
59 lb
9.3 lb
Operator Attention Light
2.2 lb
441 lb
Document Insertion Unit-F1
122 lb
396 lb
287 lb
High Capacity Stacker-E1
463 lb
High Capacity Stacker-F1
265 lb
F1
144 lb
8.2 lb
335 lb
Knife Booklet Trimmer-A1
319 lb
The floor on which this machine is installed must have strength of at least 450
). If the floor does not have this level of strength, consult your
building contractor before installing the machine.
The Marking Engine, Fixing Unit, and Power Station Unit all make up what is hereinafter referred to as the “Main Unit.”
/110 Service Guide
January 2013
Page 34
ISMAsync Controller
The approximate weight and dimensions differ depending on how the device
is configured with the optional accessories. The following table includes the
nsions of the main engine and optional
Approximate
Weight
580 lb
263 kg
59 lb
27 kg
9.3 lb
4.2 kg
2.2 lb
1 kg
441 lb
200 kg
122 lb
55 kg
396 lb
180 kg
287 lb
130 kg
463 lb
210 kg
265 lb
120 Kg
144 lb
65 kg
8.2 lb
3.7 kg
335 lb
152 kg
319 lb
145 kg
The floor on which this machine is installed must have strength of at least 450
level of strength, consult your
The Marking Engine, Fixing Unit, and Power Station Unit all make up what is hereinafter referred to as the “Main Unit.”
