Canon Oce TDS Series, Administration Manual

Page: 76 / 138

Deploy the printer driver in a Client workstation
Introduction
This section describes the procedure to install a printer on a client workstation.
Before you begin
Before you start, make sure the driver you are about to install can be combined with your printer
and operating system (see
Compatibility matrix on page 12
).
Install a printer on client workstation running on a Windows operating
system
Procedure
1. Open the ‘Printers’ window:
If your Windows OS is Then open
Windows Server 2008 R2 Start - Control Panel - (Hardware and Sound -) Printers
Windows 7 Start - Devices and printers
Windows 8/ 8.1/ 10 Right-click in the bottom left corner: Control Panel - Devices and
Printers
Windows Server 2012/
Server 2012 R2
2.
Click ‘Add Printer’ to launch the ‘Add Printer’ wizard.
3.
If requested, click ‘Add a network, wireless or Bluetooth printer’.
4. Search for the print server and the printer among those listed in the Active Directory:
• if it is listed, click ‘Next’.
• if it is not listed, click ‘The printer that I want isn’t listed’ and 'Next'.
Deploy the printer driver in a Client workstation
76 Chapter 3 - Print via LPD/LPR
Océ TDS/TCS/TC Connectivity information for Windows environments