manualshive.com logo in svg

Canon Oce TC Series, Administration Manual

Share
Download
Canon Oce TC Series Administration Manual Download Page 24

Configure the TCP/IP settings: automatic network configuration by

DHCP

Introduction

Your network type requires a configuration of the print system by DHCP.

Refer to the next table in order to locate the procedure that applies to your printing system.

Reference

If your printer is an

Then refer to this procedure

Océ TCS300

Configure the TCP/IP settings (Océ TCS300 ): automatic
network configuration by DHCP on page 24

Océ TDS/TCS (except TCS300)

Configure the TCP/IP settings in a network configuration
by DHCP (Océ TDS/TCS systems -except TCS300) on
page 26

Configure the TCP/IP settings (Océ TCS300 ): automatic network

configuration by DHCP

When to do

The next procedure applies to the Océ TCS300. For the other print systems, refer to the dedicated
procedures provided in the next sections.

Before you begin

• Make sure that DHCP reservation for IP address is done.

In this case, the IP address of the Océ system is always the same.

• Get the IP address assigned by DHCP.

For a first installation, or, to know how to get an IP address, see: 

Get to know the type of TCP/IP

network on page 23

NOTE

If no DHCP reservation is done, the IP address can change in the future. In this case, it is possible
that the Océ printing system cannot be reached anymore.

Finalise the configuration of the TCP/IP settings with the help of Océ Express WebTools

Step

Action

1

Type the IP address of the Océ printer in an internet browser.
Océ Express WebTools page appears.

2

Select the 'Configuration' menu.
Open the 'Network' or 'Connectivity' tab.

3

Go to the ‘TCP/IP (IPv4)' or ‘Adapter 1’ or 'Network adapter' section.
Click 'Edit' and log in as a System Administrator in order to configure the TCP/IP (IPv4)
settings.

4

Configure the TCP/IP settings: automatic network configuration by DHCP

24

Chapter 2 - Configure the print system controller

Océ TDS/TCS/TC Connectivity information for Windows environments

Summary of Contents for Oce TC Series











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands