Canon MX720 Series Online Manual Download Page 229

Page: 229 / 248

When the Printer Driver Is Not Associated with a Port

No Driver

is displayed for the printer's name on the

Canon IJ Network Tool

screen, the printer

driver is not associated with a created port.
To associate a port with a printer driver, follow the procedure below.

Start up IJ Network Tool.

Starting up IJ Network Tool

Select the printer displayed as

No Driver

Name

Select

Associate Port...

on the

Settings

menu.

The

Associate Port

screen is displayed.

Select a printer to associate with a port.

The list of the printers that the printer driver is installed is displayed at

Printer:

on the

Associate

Port

screen. Select a printer to associate with a created port.

Click

Summary of Contents for MX720 Series

























































































































































































































































Search results

Summary of Contents for MX720 Series

Reviews:

Canon MX720 Series, Online Manual, Page: 229 / 248

Search results

Summary of Contents for MX720 Series

Reviews: