manualshive.com logo in svg

Canon MX720 Series, Online Manual, Page: 209 / 248

Share
Download
Canon MX720 Series Online Manual Download Page 209

Access Control Sheet

Note

This screen is not available depending on the printer you are using.

You can register the MAC addresses or the IP addresses of computers or network devices to allow
access.
To display the 

Access Control

 sheet, click the 

Access Control

 tab on the 

Configuration

 screen.

1.

Printer Access Control Type:

Select the type of access control with which to limit access of computers or network devices to
the printer over a network.
The setting items may differ depending on the choice of access control methods.

When Selecting MAC address
When Selecting IP address

When Selecting MAC address

The accessible computers or network devices are specified by their MAC addresses. Computers or
network devices whose MAC addresses appear on the list are allowed access.

Summary of Contents for MX720 Series

























































































































































































































































Reviews:

No comments