Canon MX720 Series Online Manual Download Page 187

Page: 187 / 248

Monitoring Wireless Network Status

Note

This screen is not available depending on the printer you are using.
When using the machine over the wired LAN, you cannot monitor network status.

Start up IJ Network Tool.

Starting up IJ Network Tool

Select the printer in

Printers:

Select

Status

from the

View

menu.

The

Status

screen is displayed and you can check the printer status and connection

performance.

Important

If the indicated value is low, move your printer closer to the wireless network device.

If you measure the connection performance in detail, click

Advanced

Measurement...

The

Connection Performance Measurement

screen is displayed.

Click

Next>

The measurement starts and the status displays. Measurement takes a few minutes.

Summary of Contents for MX720 Series

























































































































































































































































Search results

Summary of Contents for MX720 Series

Reviews:

Canon MX720 Series, Online Manual, Page: 187 / 248

Search results

Summary of Contents for MX720 Series

Reviews: