manualshive.com logo in svg

Canon MX720 Series, Online Manual, Page: 186 / 248

Share
Download
Canon MX720 Series Online Manual Download Page 186

Changing the Settings in the Admin Password Sheet

1.

Start up IJ Network Tool.

Starting up IJ Network Tool

2.

Select the printer in 

Printers:

.

3.

Select 

Configuration...

 from the 

Settings

 menu.

4.

Click the 

Admin Password

 tab.

The 

Admin Password

 sheet is displayed.

For details on the 

Admin Password

 sheet, see 

Admin Password Sheet

.

5.

Change the settings or confirm.

To use admin password, select the 

Use admin password

 check box and enter a password.

Important

The password should consist of alphanumeric characters and be no longer than 32

characters. The password is case-sensitive. Do not forget the password you set.

6.

Click 

OK

.

A screen is displayed asking you for confirmation before the settings are sent to the printer. If
you click 

Yes

, the settings are sent to the printer and the 

Transmitted Settings

 screen is

displayed.

Summary of Contents for MX720 Series

























































































































































































































































Reviews:

No comments