manualshive.com logo in svg

Canon MX720 Series, Online Manual, Page: 182 / 248

Share
Download
Canon MX720 Series Online Manual Download Page 182

Changing the WPA or WPA2 Detailed Settings

Note

This screen is not available depending on the printer you are using.

To change the wireless network settings of the printer, connect the printer and the computer with a
USB cable temporarily. If you modify the wireless network settings of the computer over wireless
connection without USB connection, your computer may not be able to communicate with the
machine after modifying the settings.
The example screenshots in this section refer to the WPA detailed settings.

1.

Start up IJ Network Tool.

Starting up IJ Network Tool

2.

Select the printer in 

Printers:

.

When the printer is connected to the computer with a USB cable temporarily, select the printer
with "USBnnn" (where "n" is a number) appearing in the 

Port Name

 column.

3.

Select 

Configuration...

 from the 

Settings

 menu.

4.

Click the 

Wireless LAN

 tab.

5.

Select 

Use WPA

 or 

Use WPA2

 in 

Encryption Method:

 and click

Configuration...

.

The 

WPA Details

 screen is displayed (For WPA2, the 

WPA2 Details

 screen is displayed).

If encryption is not set to the printer, the 

Authentication Type Confirmation

 screen is

displayed. Go to step 7.

6.

Click 

Change Settings...

.

7.

Check the client authentication type and click 

Next>

.

Summary of Contents for MX720 Series

























































































































































































































































Reviews:

No comments