manualshive.com logo in svg

Canon MX520 series, Online Manual

Share
Download
Canon MX520 series Online Manual Download Page 746

Saving a Document in Machine's Memory to USB Flash Drive

You can save the received faxes stored in the machine's memory to the USB flash drive as PDF files using
the operation panel of the machine.

You can save a specified document in the machine's memory to the USB flash drive or save all the
documents in its memory to the USB flash drive at a time.

Saving a Specified Received Document in Machine's Memory to USB Flash Drive

Saving All the Received Documents in Machine's Memory to USB Flash Drive

Important

Do not remove the USB flash drive from the machine until saving is complete.
For safety reasons, we recommend backing up faxes saved on a USB flash drive to another media

periodically to avoid unexpected accidents.

We assume no responsibility for damage to or loss of data for whatever reason even within the

warranty period.

Note

When saving a specified document, you specify it by its transaction number. If you do not know the

transaction number for your target document, print the list of documents (MEMORY LIST) first.

Printing a List of the Document in Machine's Memory

After saving the fax in the machine's memory to the USB flash drive, the fax is still stored in the

machine's memory.
For details on how to delete the fax in the machine's memory, see 

Deleting a Document in Machine's

Memory

.

Saving a Specified Received Document in Machine's Memory to USB Flash Drive

Specify the received document and save it on the USB flash drive following the procedure below.

1.

Make sure that the machine is turned on.

Confirming that the Power Is On

2.

Insert the USB flash drive into the USB flash drive port.

Inserting the USB Flash Drive

3.

Press the 

FAX

 button.

The Fax standby screen is displayed.

4.

Press the left 

Function

 button.

The Fax menu screen is displayed.

5.

Select 

 

Memory reference

, then press the 

OK

 button.

Note

If no document is stored in the machine's memory, 

There is no document in memory.

 is

displayed. Press the 

OK

 button to return to the previous screen.

6.

Use the 

 button to select 

Save specified document

, then press the 

OK

 button.

The document selection screen is displayed.

Summary of Contents for MX520 series


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands