Setting the Ink Cartridge to be Used
This feature enables you to specify the most appropriate FINE cartridge among installed cartridges
according to an intended use.
When one of the FINE cartridges becomes empty and cannot be replaced immediately by a new one, you
can specify the other FINE cartridge that still has ink and continue printing.
The procedure for specifying the FINE cartridge is as follows:
Ink Cartridge Settings
1. Open the
2. Click
Ink Cartridge Settings
on the
Maintenance
tab
The
Ink Cartridge Settings
dialog box appears.
3. Select the FINE cartridge to be used
Select the FINE cartridge to be used for printing and click
OK
.
The specified FINE cartridge will be used from the next printing.
Important
• When the following settings are specified,
Black Only
does not function because the machine uses
the color FINE cartridge to print documents.
• Other than
Plain Paper
,
Envelope
,
Hagaki A
, or
Hagaki
is selected for
Media Type
on the
Main
tab
•
Borderless
is selected from the
Page Layout
list on the
Page Setup
tab
• Do not detach the FINE cartridge that is not in use. Printing cannot be performed while either FINE
cartridge is detached.
148
Summary of Contents for MX470
