Canon MX450 series Online Manual Download Page 88

Page: 88 / 868

Deleting a Document in Machine's Memory

You can delete a specified document in the machine's memory or delete all the documents in its memory at
a time.

Deleting a Specified Document in Machine's Memory

Deleting All the Documents in Machine's Memory

Note

When deleting a specified document, you specify it by its transaction number. If you do not know the

transaction number for your target document, print the list of documents (MEMORY LIST) first.

Printing a List of the Document in Machine's Memory

Deleting a Specified Document in Machine's Memory

Specify the document and delete it following the procedure below.

Make sure that the machine is turned on.

Confirming that the Power Is On

Press the

FAX

button.

The Fax standby screen is displayed.

Press the

Menu

button.

The

FAX menu

screen is displayed.

Use the

button to select

Memory reference

, then press the

button.

Note

If no document is stored in the machine's memory,

No documents in memory

is displayed on

the LCD.

Use the

button to select

Del. specified doc.

, then press the

button.

The document selection screen is displayed.

Note

A transaction number from "0001" to "4999" indicates a document being sent. A transaction

number from "5001" to "9999" indicates a document being received.

Each mark before the transaction number indicates the following:

No mark: Indicates a black and white document.

: Indicates a color document.

: Indicates the document during transmission.

: Indicates the document sent with sequential broadcasting.

By pressing the

button or the

Tone

button, the transaction number displayed on the LCD is

switched to transaction time or fax/telephone number.

Use the

button to select the transaction number (TX/RX no.) of the document you want to

delete, then press the

button.

The confirmation screen is displayed.

Use the

button to select

Yes

, then press the

button.

Summary of Contents for MX450 series





































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX450 series

Reviews:

Related manuals for MX450 series

Brands by name

Popular brands

Canon MX450 series, Online Manual

Search results

Summary of Contents for MX450 series

Reviews:

Related manuals for MX450 series

Brands by name

Popular brands