Canon MX450 series Online Manual Download Page 339

Page: 339 / 868

Printing the Nozzle Check Pattern

Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzle.

Note

If the remaining ink level is low, the nozzle check pattern will not be printed correctly. Replace the FINE cartridge

whose ink is low.

Replacing a FINE Cartridge

You need to prepare: a sheet of A4 or Letter-sized plain paper

Make sure that the power is turned on.

Load a sheet of A4 or Letter-sized plain paper in the front tray.

Open the output tray extension, open the paper output tray, then extend the paper output
support.

Print the nozzle check pattern.

(1)

Press the

Setup

button.

The

Setup menu

screen will appear.

(2)

Use the or button to select

Maintenance

, then press the

button.

LCD and Operation Panel

(3)

Use the or button to select

Nozzle check

, then press the

button.

The nozzle check pattern will be printed.

Examine the nozzle check pattern.

Examining the Nozzle Check Pattern

Note

To access other available functions, use the mode buttons.

Summary of Contents for MX450 series





































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX450 series

Reviews:

Canon MX450 series, Online Manual, Page: 339 / 868

Search results

Summary of Contents for MX450 series

Reviews: