MV750i E, MV730i E, MV700i E, MV700 E, MV690 E
GENERAL DESCRIPTION OF PRODUCT
14
2-4 End search
End search is a function that locates the point at which the recording of the last scene ends. (It is used when, after the scenes shot on the
tape have been viewed, smooth scene transition is to be provided from the picture shot last.)
The tape is cued up by storing the tape counter value of the end of the last recorded scene in the memory, and searching the point at which
the recording of the last scene ends on the basis of this counter value. Since about 4 seconds of the end part of the recording is played
back with sound, the scene monitoring can be conducted at the same time.
• Operating procedure
1. Set the power switch to “Playback (VCR).”
2. Set the tape/card selector switch to “Tape.”
3. Press the “End search” key.
* The end search key operation is acknowledged in the “Tape & STOP mode,” and only when its operation is acknowledged, one of the
following displays appear.
* To stop the end search, press the “End search” key again. (It can also be stopped by selecting the STOP, PLAY, FF, REW, EJECT or
POFF mode.)
• Display
English-language display : END SEARCH
After the end search key has been operated :
After operation has been enabled, the display appears in white characters at the screen center while the end
search operation is in progress.
After operation has been disabled and then the cassette has been inserted, reddish-purple characters flash (once
every 4 seconds) when no recording is undertaken.
REC 1
REC 2
REC 3
Cassette IN
Scene transition
Scene transition
End search conducted
The absolute track number (ATN)
recorded at the point at which the
recording of the last scene ended
is stored in the memory backed up
by the lithium battery.
The tape transport is controlled in
such a way that the absolute track
number (ATN) played back from
the tape is matched with the value
stored in the memory.
*
End search does not function when the tape is removed since the correspond-
ence between the cassette and the absolute track number of the recording
end point is lost.
*
If there are unrecorded blanks along the tape, the end search function may not
work properly.
*
The recording end point applies to the recording operations in all the areas,
and the end points of AV insertion and/or audio dubbing cannot be searched.
Absolute track number : A serial number inherent to the recording tracks which is recorded in the sub-code area.
END SEARCH
Summary of Contents for MV690 E
Page 193: ...22 MV750i E MV730i E MV700i E MV700 E MV690 E PARTS LIST Lens Unit Section 1 1 2 3 1 1 1 2 ...
Page 195: ...24 DMC III PARTS LIST 1 10 3 9 5 7 8 6 4 2 3 3 Mechanical Chassis Section 1 ...
Page 197: ...26 DMC III PARTS LIST 1 2 3 4 5 6 7 8 6 1 9 10 13 11 12 Mechanical Chassis Section 2 ...
Page 201: ...30 DMC III PARTS LIST 1 3 4 5 8 9 6 10 7 2 11 Mechanical Chassis Section 4 ...
