background image

22

■ 

BEFORE YOU BEGIN ... 

Keyboard keys

This is a summary of the keyboard keys.

9

 Function keys

The following functions are assigned on the respective keys

before factory shipping. For details, refer to P.37 “Setting the

function keys.”

P1: DATE
P2: NOTE
P3: PICTURE
P4: SHARPNESS

!0

 Cassette Select key

Selects paper cassette for printing when the scanner is con-

nected with the Fileprint 450.

!1

 Auto Rotate key

Rotates the image 90 degrees for printing.

!2

 Zoom keys

Use these keys to register zoom settings. During normal

operation, you can immediately switch to one of the registered

settings by pressing the key.

!36

 Rotate keys

Press this key to rotate the image left or right by 90 degrees.

!6

 Reset key

Use this key to restore or change default settings.

!56

 Film Control knob (optional)

Transports film through a motorized carrier. Turn the knob

right to advance the film forward, or left to rewind it.

!6

 Adjust Mode indicators

The illuminated lamp identifies the type of image adjustment

you can make. You can switch the adjustment type by pressing

the Image Adjust Select key.

!7

 Image Adjust Select key

Selects the type of adjustment you can make: Zoom magnifica-

tion, Focus, or Rotation.

!8

 Image Adjust Control dial

Use this dial to adjust the magnification, focus or rotation.

Summary of Contents for Microfilm Scanner 350





























































Reviews: