Canon mg6400 series Online Manual Download Page 264

Page: 264 / 318

Search Screen

Note

• This screen is not available depending on the printer you are using.

The access points detected are listed.

Detected Access Points:

The signal strength from the access point, encryption type, name of access point, and the radio channel
can be confirmed.

Important

• If you connect to a network that is not protected with security measures, there is a risk of disclosing

data such as your personal information to a third party.

Note

• Signal strength is displayed as follows.

: Good

: Fair

: Poor

• Type of encryption is displayed as follows.

Blank: No encryption

WEP

: WEP is set

WPA

: WPA is set

WPA2

: WPA2 is set

Update

Click to update the list of access points when your target access point is not detected.

If the target access point is set to the stealth mode, click

Cancel

to return to the previous screen and

enter the access point's SSID in

SSID:

on the

Wireless LAN

sheet.

Wireless LAN Sheet

264

Summary of Contents for mg6400 series































































































































































































































































































































Search results

Summary of Contents for mg6400 series

Reviews:

Canon mg6400 series, Online Manual, Page: 264 / 318

Search results

Summary of Contents for mg6400 series

Reviews: