Canon mg6400 series Online Manual Download Page 262

Page: 262 / 318

Wireless LAN Sheet

Note

• This screen is not available depending on the printer you are using.

Allows you to set the printer with wireless LAN connection.

To display the

Wireless LAN

sheet, click the

Wireless LAN

tab on the

Configuration

screen.

Network Type:

Infrastructure

Connects the printer to the wireless LAN with an access point.

SSID:

The SSID of the wireless LAN is displayed.

As the initial settings, the unique value is displayed.

Note

• Enter the same SSID that the access point is configured to use. The SSID is case-sensitive.

Search...

The

Search

screen is displayed to select an access point to connect to.

Search Screen

Note

• When IJ Network Tool runs over a LAN, the button is grayed out and cannot be selected. Connect

the printer and the computer with a USB cable temporarily to change the settings.

Encryption Method:

Select the encryption method used over the wireless LAN.

262

Summary of Contents for mg6400 series































































































































































































































































































































Search results

Summary of Contents for mg6400 series

Reviews:

Canon mg6400 series, Online Manual, Page: 262 / 318

Search results

Summary of Contents for mg6400 series

Reviews: