Setting Preferences and Scanning with ScanGear MF
3-25
S
c
ann
ing
3
Advanced Mode Settings
Input Settings
■
[Select Image Source]
This setting is not available for this model. ([Platen Glass] is automatically
selected.)
■
[Paper Size]
Selects the size of the document to be scanned. The preview area size
(height-to-width ratio) will change to the paper size you selected.
Change this setting to set up the machine not to scan beyond the parameters of the
scan when previewing or if you are scanning without specifying the parameters of
the scan. If you do not know the size of the document, select [Full Platen] or a large
size. You can specify the parameters after previewing. If you change [Paper Size]
setting after previewing, the preview image will be deleted.
