Canon MAXIFY MB2350, Online Manual

Page: 351 / 1154

• Authentication Method
The method that an access point uses to authenticate a printer through a wireless LAN. The methods
are agreeable each other.
When using WEP as an encryption method, the authentication method is able to fix to Open System
or Shared Key .
For WPA/WPA2, authentication method is PSK.
◦ Auto
The printer automatically changes its authentication method to match the access point.
◦ Open System
In this authentication method, the communication partner is authenticated without using WEP key
even if
Use WEP is selected.
◦ Shared Key
In this authentication method, the communication partner is authenticated using the WEP key that
was set for encryption.
B
• Bonjour
A service built into Mac OS X operating system to detect the connectable devices on a network
automatically.
C
• Channel
Frequency channel for wireless communication. In the infrastructure mode, the channel is
automatically adjusted to match that set to the access point. This machine supports channels 1 to 13.
(Channels 12 and 13 are not supported depending on the country or region of purchase.) Note that
the number of channels that can be used for your wireless LAN varies depending on the region or
country.
D
• Default Gateway
A relay device to connect to another network such as a router or a computer.
• DHCP server functionality
The router or the access point assigns an IP address automatically whenever the printer or the
personal computer on a network starts up.
• DNS server
A server that converts device names into IP addresses. When specifying IP addresses manually,
specify the addresses of both a primary and a secondary server.
351