manualshive.com logo in svg

Canon MAXIFY iB4140, Online Manual

Share
Download
Canon MAXIFY iB4140 Online Manual Download Page 492

Cannot Print from Smartphone/Tablet

If you cannot print from your smartphone/tablet, it is possible that your smartphone/tablet cannot
communicate with the printer.

Check the cause of your problem according to the connection method.

Cannot Communicate with Printer over Wireless LAN
Cannot Communicate with Printer while It Is in Direct Connection

Note

• For problems on printing with other connection methods or more on performing settings of each

connection method:

Using PIXMA/MAXIFY Cloud Link
Printing with Google Cloud Print
Printing from an AirPrint-enabled Printer with iOS Device

Cannot Communicate with Printer over Wireless LAN

If your smartphone/tablet cannot communicate with the printer, check the following.

Check1

 Make sure printer is turned on.

Check2

 Set 

Change LAN

 in 

LAN settings

 under 

Device settings

 to 

Wireless LAN

.

Check3

 Are network settings of printer identical with those of wireless router?

Make sure the network settings of the printer (e.g. wireless router name, SSID, network key, etc.) are identical
with those of the wireless router.

To check the settings of the wireless router, refer to the instruction manual provided with it or contact its
manufacturer.

To check the current network settings of the printer, print out the network setting information.

Printing Network Settings

If the network settings of the printer are not identical with those of the wireless router, match the network
settings of the printer to those of the wireless router.

Check4

 Are network settings of your smartphone/tablet identical with those of wireless

router?

Make sure the network settings of your smartphone/tablet (e.g. wireless router name, SSID, network key, etc.)
are identical with those of the wireless router.

To check the settings of your smartphone/tablet, refer to the instruction manual provided with it.

If the network settings of your smartphone/tablet are not identical with those of the wireless router, change the
network settings of it to match with those of the wireless router.

492

Summary of Contents for MAXIFY iB4140



















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands