Canon MAXIFY iB4060 Online Manual Download Page 58

Page: 58 / 504

(8)

Display area

(1) Mng. printer (Select printer) button

When you select the

Mng. printer

(

Select printer

) button, the

Mng. printer

(

Select printer

) screen

appears.

From the

Mng. printer

screen (

Select printer

registered to the Canon Inkjet Cloud Printing Center,

•

Check the printer information*

The registered printer name is displayed.

indicates the currently selected printer.

indicates that an error occurred on the printer.

•

Display update date/time of the printer information*

This displays the date and time the printer information was last updated.

refreshes the information.

Summary of Contents for MAXIFY iB4060

























































































































































































































































































































































































































































































































Search results

Summary of Contents for MAXIFY iB4060

Reviews:

Canon MAXIFY iB4060, Online Manual, Page: 58 / 504

Search results

Summary of Contents for MAXIFY iB4060

Reviews: