Canon MAXIFY iB4060 Online Manual Download Page 254

Page: 254 / 504

Key Points to Successful Printing

Check the printer status before printing!

• Is the print head OK?

If a print head nozzle is clogged, print will be faint and papers will be wasted. Print the nozzle check
pattern to check the print head.

Maintenance Procedure

• Is the inside of the printer smeared with ink?

After printing large quantities of paper, the area where papers go through may get smeared with ink.
Clean the inside of your printer with

Bottom Plate Cleaning

Check how to load the paper correctly!

• Is the paper loaded in the correct orientation?

To load paper in a cassette, load paper WITH THE PRINTING SIDE FACING DOWN.

Loading Paper

A: cassette 1

B: cassette 2

• Is the paper curled?

The curled paper causes paper jam. Flatten the curled paper, then reload it.

"Load the paper after correcting its curl." in

Paper Is Smudged/Printed Surface Is Scratched

254

Summary of Contents for MAXIFY iB4060

























































































































































































































































































































































































































































































































Search results

Summary of Contents for MAXIFY iB4060

Reviews:

Canon MAXIFY iB4060, Online Manual, Page: 254 / 504

Search results

Summary of Contents for MAXIFY iB4060

Reviews: