manualshive.com logo in svg

Canon MAXIFY iB4060, Online Manual, Page: 382 / 504

Share
Download
Canon MAXIFY iB4060 Online Manual Download Page 382

Paper Is Smudged/Printed Surface Is Scratched

 Paper Is Smudged

The Edges of Paper Are Smudged Printed Surface Is Smudged

 Printed Surface Is Scratched

Check1

 Did you confirm the paper and print quality settings?

Print Results Not Satisfactory

Check2

 Is the appropriate type of paper used?

Check to see if the paper you are printing on is suitable for your printing purpose.

Media Types You Can Use

Check3

 Load the paper after correcting its curl.

When using Photo Paper Plus Semi-gloss, even if the sheet is curled, load one sheet at a time as it is. If you roll
up this paper to flatten, this may cause cracks on the surface of the paper and reduce the print quality.

We recommend putting unused paper back into the package and keeping it on a level surface.

•

For Plain Paper

Turn the paper over and reload it to print on the other side.

•

For Other Paper

If the curl on the four corners of the paper is more than 0.1 inch / 3 mm (A) in height, the paper may be
smudged or may not be fed properly. In such cases, follow the procedure described below to correct the
paper curl.

382

Summary of Contents for MAXIFY iB4060

























































































































































































































































































































































































































































































































Reviews:

No comments