Canon MAXIFY GX2000 Series Online Manual Download Page 187

Page: 187 / 693

IPv4 subnet mask

XXX. XXX. XXX. XXX

IPv4 default gateway

XXX. XXX. XXX. XXX

IPv6 link-local address

XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX

MAC address (Wired LAN)

XX:XX:XX:XX:XX:XX

Printer name

XXXXXXXXXXXXXXX

Bonjour service name

XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX

("XX" represents alphanumeric characters.)

•

Enable/disable Wired LAN

•

Enables/disables wired LAN.

•

Advanced

•

For details on each setting item:

Advanced setup

Advanced setup

•

Set printer name

•

Specifies the printer name. You can use up to 15 characters for the name.

Note

• You cannot use the same printer name as that already used for other LAN connected devices.

•

• You cannot use a hyphen for the initial or last character of the printer name.

•

TCP/IP settings

•

Performs IPv4 or IPv6 setting.

•

WSD settings

•

Setting items when you use WSD (one of the network protocols supported in Windows).

◦

Enable/disable WSD

◦

Selects whether WSD is enabled or disabled.

Note

• When this setting is enabled, the printer icon is displayed on the Network Explorer in

•

Windows.

◦

Optimize inbound WSD

◦

Selecting

Enable

allows you to receive the WSD printing data faster.

◦

WSD scan from this printer

◦

187

Summary of Contents for MAXIFY GX2000 Series






















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MAXIFY GX2000 Series

Reviews:

Canon MAXIFY GX2000 Series, Online Manual, Page: 187 / 693

Search results

Summary of Contents for MAXIFY GX2000 Series

Reviews: