manualshive.com logo in svg

Canon MAXIFY GX2000 Series, Online Manual, Page: 184 / 693

Share
Download
Canon MAXIFY GX2000 Series Online Manual Download Page 184

LAN settings

Select this setting item from 

 

Printer settings

 in 

 (Setup).

Important

• The administrator password may be required to change the settings.

•

Wi-Fi
Wireless Direct
Wired LAN

To print the network settings, select 

Print details

 and select 

Yes

.

Printing Network Settings

Important

• The network settings printout contains important information about your network. Handle it with care.

•

Wi-Fi

•

Wi-Fi setting list

•

The network settings information of the printer appears when it is connected by Wi-Fi. (Some setting
items are not displayed depending on the printer settings.)

Items

Setting

Connection

Enabled (connected)/Enabled (disconnected)/Disable

Network name (SSID)

XXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXX

Frequency

2.4 GHz/5 GHz

Wi-Fi security

Inactive/WPA-PSK/WPA2-PSK/WPA3-PSK/WPA-EAP(AES)/WPA2-
EAP(AES)/WPA3-EAP(AES)

Signal strength (%)

XXX

IPv4 address

XXX. XXX. XXX. XXX

IPv4 subnet mask

XXX. XXX. XXX. XXX

IPv4 default gateway

XXX. XXX. XXX. XXX

IPv6 link-local address

XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX

MAC address (Wi-Fi)

XX:XX:XX:XX:XX:XX

Printer name

XXXXXXXXXXXXXXX

Bonjour service name

XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX

184

Summary of Contents for MAXIFY GX2000 Series






















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments