Canon LX-P1300 User Manual Download Page 171

Page: 171 / 210

165

List of Error Messages/Warning Messages

Error Message

■

Operator Call Error

If problems persist after trying these procedures, please contact your place of purchase. (#**** represents numbers)

Error Message

Error Content

Handling

Transport unit fl ap open

The transport unit lever is open.

Close the transport unit lever.

Ink tank cover open

The ink tank cover is open.

Close the ink tank cover.

XXXX ink empty

("XXXX" is black, cyan, magenta, or
yellow)

There is no ink available for
printing.

Replace with new ink tank.

(P.101)

XXXX ink tank setting error

("XXXX" is black, cyan, magenta, or
yellow)

The ink tank is not inserted
properly.

Set the ink tank again.

(P.101)

XXXX ink tank abnormality #****

("XXXX" is black, cyan, magenta, or
yellow)

The ink tank is not recognized.
Either the ink tank is abnormal
or an unsupported ink tank is
installed.

Replace with new ink tank.

(P.101)

Maintenance cartridge full #****

The maintenance cartridge's ink is
full.

Replace with new maintenance
cartridge.

(P.108)

Maintenance cartridge setting
error

The maintenance cartridge is not
inserted properly.

Set the maintenance cartridge
again.

(P.108)

Maintenance cartridge
abnormality

The maintenance cartridge is not
recognized.

Replace with new maintenance
cartridge.

(P.108)

Summary of Contents for LX-P1300



















































































































































































































Search results

Summary of Contents for LX-P1300

Reviews:

Related manuals for LX-P1300

Brands by name

Popular brands

Canon LX-P1300, User Manual

Search results

Summary of Contents for LX-P1300

Reviews:

Related manuals for LX-P1300

Brands by name

Popular brands