61
ENGLIS
H
FUNCTION
DESCRIPTION
Image Mode
Pre-defined image modes are provided so you can optimize
your projector image set-up to suit your program type. See
"Selecting a image mode" on page 42
for details.
Brightness
Adjusts the brightness of the image. See
for details.
Contrast
Adjusts the degree of difference between dark and light in
the image. See
"Adjusting Contrast" on page 42
for details.
Color
Adjusts the color saturation level -- the amount of each color
in a video image. See
for
details.
Tint
Adjusts the red and green color tones of the image. See
for details.
The function is only available when Video or S-
Video with NTSC system is selected.
Sharpness
Adjusts the image to make it look sharper or softer. See
"Adjusting Sharpness" on page 43
for details.
BrilliantColor™
Adjusts white peaking while maintaining correct color
"Adjusting BrilliantColor™" on page 43
for details.
Color Temperature
"Selecting a Color Temperature" on page 43
for details.
6-axis Color Adjust
"6-axis Color Adjust" on page 43
for details.
Auto Search
"Switching input signal" on page 37
for details.
Presentation Timer
Reminds the presenter to finish the presentation within a
certain time frame. See
"Setting the presentation timer" on
for details.
Language
Sets the language for the On-Screen Display (OSD) menus.
Image flip H/V
"Choosing a location" on page 21
for details.
Auto Power Off
Allows the projector to turn off automatically if no input
signal is detected and no operation is made by user after a set
period of time. See
"Setting Auto Power Off" on page 66
details.
2. PICTURE
menu
3. INPUT me
nu
4.
SYS
TEM SETUP: Basic
m
enu