Compliance
— 2 —
The CE Mark is a Directive conformity mark of
the European Community(EC).
The Alert Mark is a Directive conformity mark
of the European Community.
Federal Communication Commission Notice
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures :
–
Reorient or relocate the receiving antenna.
–
Increase the separation between the equipment and receiver.
–
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
–
Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC
Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the
instructions. If such changes or modifications should be made, you could be required to stop
operation of the equipment.
Model number
: LV-WN02 (KF-11B10ZA1)
Trade name
: Canon
Responsible party
: Canon U.S.A., Inc.
Address
: One Canon Plaza, Lake Success, NY 11042, U.S.A.
Telephone no.
: (516)328-5600
For Canadian Users
This Class B digital apparatus complies with Canadian ICES-003.
Cet apparei numérique de la class B est conforme à la norme NMB-003 du Canada.
L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes : (1) il ne doit pas
produire de brouillage et (2) l’utilisateur du dispositif doit être prêt à accepter tout brouillage
radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement
du dispositif.
CAUTION
Changes or modifications not expressly approved by the manufacturer could void the user’s
authority to operate the equipment.
Exposure to radio frequency
This product uses a wireless LAN card (CF Card) to communicate with other devices using the 2.4
GHz ISM band. The radiated power output of this card is well below FCC radio frequency
exposure limits. However, it is advised to maintain a minimum 20 cm separation between the
product and user(s) or bystanders to minimize human exposure to the transmitted radio
frequencies.
For French Users
Restricted frequency band only channels 10 through 11 (2457MHz and 2462MHz respectively) may
be used in France. License required for every installation, indoor and outdoor installations.
Please contact ART for procedure to follow. Do not use this wireless LAN card in the open air.
Statement on EC Directive
Hereby, Canon, declares that this KF-11B10ZA1 is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC.
