![background image](http://html1.mh-extra.com/html/canon/lv-s3-svga-lcd-projector/lv-s3-svga-lcd-projector_specification_4026216012.webp)
7.25 Bri
Command
Command “C20” [CR]
Detail
Brightness of user c1
Acceptable
[ACK] [CR]
Response
Unacceptable “?” [CR]
7.26 Brightness-
Command
Command “C21” [CR]
Detail
Brightness of user control -1
Acceptable
[ACK] [CR]
Response
Unacceptable “?” [CR]
7.27 Image
(Toggle)
Command
Command “C27” [CR]
Detail
Switch Image setting status.
This command works the same as the remote control’s “Image” button or the
key on the projector body.
Acceptable
[ACK] [CR]
Response
Unacceptable “?” [CR]
7.28 Power Management Ready Command
Command “C2A” [CR]
Detail
Set Power Management to Ready
This status is stored in EEPROM, so even if turning off and on.
Acceptable
[ACK] [CR]
Response
Unacceptable “?” [CR]
7.29 Power Management OFF Command
Command “C2B” [CR]
Detail
Set Power Management to OFF mode.
This status is stored in EEPROM, and even if turning OFF and ON.
Acceptable
[ACK] [CR]
Response
Unacceptable “?” [CR]
7.30 Power Management Shut Down Command
Command “C2E” [CR]
Detail
Set Power Management to Shut down mode.
This status is stored in EEPROM, and even if turning OFF and ON.
Acceptable
[ACK] [CR]
Response
Unacceptable “?” [CR]
Page
12/21