PcCommandE
======================================================================
Control Commands for LV series
Rev1.0.0
Copyright (C) NEC Viewtechnology, Ltd. 2006
----------------------------------------------------------------------
Updated on May 19, 2006
----------------------------------------------------------------------
This file contains information about projector control commands.
Model Name
LV-7245/7240/X5
LV-7255/7250/X6
======================================================================
Contents
1. Projector Control
2. Interface Conditions
3. List of Commands
4. Command Descriptions
5. Data Portion of Response
======================================================================
1. Projector Control
----------------------------------------------------------------------
The control commands allow the user to control the functions of the projector via a computer.
======================================================================
2. Interface Conditions
----------------------------------------------------------------------
Serial connection
----------------------------------------------------------------------
The communications method conforms to the RS-232C standard.
Baud rate: 19200 bps
Data length: 8 bits
Parity bit: No parity
Stop bits: 1 bit
Communications mode: Full duplex
The control connector is described below.
The SERVICE PORT is a mini DIN 8-pin port.
1 To TxD of PC
2
3
4 To GND of PC
5
6
7 To RxD of PC
8
* 2, 3, 5, 6, and 8 are used inside the projector.
======================================================================
3. List of Commands
----------------------------------------------------------------------
Command name
----------------------------------------------------------------------
001. POWER ON 02H 00H 00H 00H 00H 02H
002. POWER OFF 02H 01H 00H 00H 00H 03H
003. INPUT SELECT RGB(*5) 02H 03H 00H 00H 02H 01H <DATA> CKS
004. INPUT SELECT VIDEO 02H 03H 00H 00H 02H 01H 06H 0EH
005. INPUT SELECT S-VIDEO 02H 03H 00H 00H 02H 01H 0BH 13H
(1)
