Canon LV-5200U, Service Manual, Page: 31 / 126

3.5 Lamp Ballast Unit Removal
1. Remove 1 screw A (M3
×
4) and remove SW902, and then remove 1 screw B (M3
×
6)
and disconnect the Lamp Socket.
2. Remove 2 screws C (M3
×
6) to take the Lamp Ballast ass’y upward off.
3. Remove 2 screws D (T2
×
6) to take the isolation sheet off.
4. Remove 4 screws E (T3
×
6) to take the lamp ballast board off.
3.6 Filter Board Removal
1. Remove 3 screws
A
(M3
×
6) and pull the Filter Board ass’y upward.
2. Remove 1 screw B (M4
×
8) to take the grounding lead from the cabinet bottom.
3. Remove 4 screws C (T3
×
8) to take the Filter Board off.
Part 2: Repair Information
2-6
Fig. 2-9
Fig. 2-10
A
A
A
B
C
C
C
C
Filter board
B
A
Lamp ballast board
C
C
E
D
D
Isolation sheet
E
E
E
SW902
Lamp ballast socket