manualshive.com logo in svg

Canon lpb3360, User Manual

Share
Download
Canon lpb3360 User Manual Download Page 283

8-46

Tr

oub

leshooting

8

When You Cannot Obtain Appropriate Printout Results

 

Print Quality Problems

White streaks appear.

Cause 1

Toner in the toner cartridge is running out.

Remedy

Take the toner cartridge out of the printer, shake it gently 5 or 6 times to evenly 
distribute the toner, and then reinstall the toner cartridge. If this does not solve 
the problem, replace the toner cartridge with a new one. (See "Replacing the 
Toner Cartridge," on p. 7-2)

Cause 2

The drum in the toner cartridge has deteriorated.

Remedy

Replace the toner cartridge with a new one. (See "Replacing the Toner 
Cartridge," on p. 7-2)

Printed pages have white specks.

Cause 1

Appropriate paper is not being used.

Remedy

Replace the paper with one that can be used and print again. (See "Paper 
Requirements," on p. 4-2)

Cause 2

Paper is damp since the paper has been stored in unsuitable condition.

Remedy

Replace the paper with new one and print again. (See "Paper Requirements," 
on p. 4-2)

Cause 3

The drum in the toner cartridge has deteriorated.

Remedy

Replace the toner cartridge with a new one. (See "Replacing the Toner 
Cartridge," on p. 7-2)

The overall print result is faint.

Cause 1

The setting for the toner density is not appropriate.

Remedy

Adjust DENSITY (See p. 6-24) in the QUALITY MENU options in the SETUP 
menu.

Cause 2

TONER SAVE in the QUALITY MENU options in the SETUP menu is set to ON.

Remedy

Set TONER SAVE (See p. 6-24) in the QUALITY MENU options in the SETUP 
menu to OFF.

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for lpb3360



















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands