Canon LiDE220 Online Manual Download Page 160

Page: 160 / 247

Advanced Mode Tab

This mode allows you to make advanced scan settings such as the color mode, output resolution, image
brightness, and color tone.

This section describes the settings and functions available on the

Advanced Mode

tab.

(1) Settings and Operation Buttons
(2) Toolbar
(3) Preview Area

Note

• The displayed items vary by document type and view.

(1) Settings and Operation Buttons

Favorite Settings

You can name and save a group of settings (Input Settings, Output Settings, Image Settings, and
Color Adjustment Buttons) on the

Advanced Mode

tab, and load it as required. It is convenient to

save a group of settings if you will be using it repeatedly. You can also use this to reload the default
settings.

Select

Add/Delete...

from the pop-up menu to open the

Add/Delete Favorite Settings

dialog.

160

Summary of Contents for LiDE220
























































































































































































































































Search results

Summary of Contents for LiDE220

Reviews:

Brands by name

Popular brands

Canon LiDE220, Online Manual

Search results

Summary of Contents for LiDE220

Reviews:

Brands by name

Popular brands