44
Basic operation
Computer -1
Input selection
Basic operation
Press the INPUT button on the top control panel
or on the remote controller to select one of the
following input: Computer-1, Computer-2,HDMI
1, HDMI-2, Video, Network, Memory Viewer and
USB Display as input signal.
Menu operation
1 Press the INPUT button on remote controller to
enter the Input menu.
2 Press
button to select one of the follow-
ing input: Computer-1, Computer-2,HDMI-1,
HDMI-2, Video, Network, Memory Viewer and
USB Display, then press the OK button to
select the input signal.
Select input Computer-1 if a PC is connected to
the COMPUTER-1 IN terminal.
Computer -2
Select input Computer-2 if a PC is connected to
the COMPUTER-2 IN terminal.
HDMI-1
Select input HDMI-1 if a device is connected to
the HDMI-1 terminal.
HDMI-2
Select input HDMI-2 if a device is connected to
the HDMI-2 terminal.
Video
Select input Video if a PC is connected to the
VIDEO terminal with the BNC cable.
Input menu
Computer-1
Computer-2
HDMI-1
HDMI-2
Video
Memory Viewer
USB Display
Network
Remote controller
INPUT
Top control Panel
INPUT
Note:
● If the "
Input search
" function in the Auto Setup option is set to "On", once you press the AUTO
button, the projector will search for input signals automatically.