Canon Leisegang OptiK 2 Setup Instructions Download Page 4

Page: 4 / 4

Setup Instructions

CLP4270029 • Rev. A • 01/22

Page - 4

Check that the camera power switch is set to On.

Check that the flash is not lifted so that the flash will not fire.

Press the Camera Button on the back to activate Live View Shooting and view image on the

camera’s LCD monitor.

Optionally attach the Video cable to an external LCD Display.

Attach the Remote Switch to the remote switch input jack on the camera body. Or, attach the

Foot Pedal to the remote switch input jack on the camera body.

Slide the Camera body attached to the camera mounting adapter into your OptiK Model 2

Colposcope.

To take a picture; press the remote release switch; foot pedal or shutter release.

Canon

is a registered trademark of CANON U.S.A or Canon, Inc.

CooperSurgical and Leisegang OptiK

are registered trademarks of CooperSurgical, Inc.

Summary of Contents for Leisegang OptiK 2

Page 1: ...Canon EOS Rebel dSLR Digital Single Lens Reflex Camera System ships without Lens 95 Corporate Drive Trumbull CT 06611 USA Leisegang OptiK Model 2 COLPOSCOPE SETUP INSTRUCTIONS...

Page 2: ...isegang OptiK Model 2 Colposcope It also includes additional instructions if you are using an external LCD Monitor Monitor sold separately Please refer to the manufacturer s instruction manual on sett...

Page 3: ...view Duration time to Hold 11 On the Shooting Settings Menu in the 1 tab set Release shutter without card to Off This sets the camera not to shoot unless there is a card in the camera 12 On the Functi...

Page 4: ...external LCD Display 18 Attach the Remote Switch to the remote switch input jack on the camera body Or attach the Foot Pedal to the remote switch input jack on the camera body 19 Slide the Camera body...