Canon Legria hfm300 Page 179 Instruction Manual Download

Page: 179 / 203

Additional Information

179

This scene was recorded using another device and cannot be added to the playlist.

- Scenes that were not recorded with this camcorder cannot be added to the playlist.

This scene was recorded using another device and cannot be copied.

- Scenes that were not recorded with this camcorder cannot be copied to the memory card.

To record video on this memory card, it is recommended to use only the XP+/SP/LP recording
modes

- Movies may not be recorded correctly on this memory card if the recording mode is set to

MXP or FXP mode (

56).

To use this function change the camcorder's mode from

- You pressed a button that cannot be used in

mode. Set the mode switch to

to set

the camcorder to flexible recording mode.

Too many photos. Disconnect the USB cable.

- Disconnect the USB cable. Try using a memory card reader or decrease the number of photos

on the memory card to fewer than 2,500 photos (printers, Windows computers), or 1,000
photos (Macintosh computers).

- If a dialog box appeared on the computer screen, close it. Disconnect the USB cable, and

restore the connection after a short while.

Total play time is too long

- The playlist cannot be converted when its total playback time exceeds 2 hours and 30 min-

utes. Reduce the number of scenes in the playlist.

Unable to recognize the data

- You transferred to the camcorder video files that were recorded with another device using a

different television system (NTSC). Play back the recordings with the device originally used to
record them.

Unable to recover data

- Could not recover a corrupted file. Save your recordings (

124) and initialize the memory

using the [Complete Initialization] option (

37).

Messages Related to the Optional DW100 DVD Burner

If an error message appears while the camcorder is connected to the
optional DW-100 DVD Burner, refer to the following section and also to
the instruction manual of the DVD Burner.

Cannot read the disc. Check the disc.

- During disc recording mode, this message can appear when a commercially available DVD

disc (a DVD disc containing movies, software, etc.) or an 8 cm mini DVD disc is inserted.
Replace with a brand new disc.

- During disc playback mode, this message can appear when a commercially available DVD

disc or a brand new DVD disc is inserted. Replace with an AVCHD disc created with the DVD
Burner.

Summary of Contents for Legria hfm300












































































































































































































Search results

Summary of Contents for Legria hfm300

Reviews:

Related manuals for Legria hfm300

Brands by name

Popular brands

Canon Legria hfm300, Instruction Manual

Search results

Summary of Contents for Legria hfm300

Reviews:

Related manuals for Legria hfm300

Brands by name

Popular brands