Wi-Fi Functions
119
Connecting the iOS/Android Device
If the iOS/Android device is connected to the same Wi-Fi network as
the camcorder, CameraAccess plus will recognize the camcorder's ID
and register it automatically. Otherwise, you can enter the camcorder's
ID manually.
As long as you do not reset the camcorder's settings, you only need to
register the camcorder's ID the first time you connect the device. Later
on, you only need to enter the Monitor while Out password (start this
procedure from step 4).
To register the camcorder's ID in the CameraAccess plus app
1 If the iOS/Android device is near the camcorder, turn on Wi-Fi and
select the same access point as that to which the camcorder is
connected (step 5 in the previous procedure).
2 Start the CameraAccess plus app and touch Setting and then
Start.
If the iOS device is not connected to the same access point as the
camcorder, enter manually the camcorder's ID that is displayed on the
camcorder's screen (step 6 in the previous procedure).
3 Touch Finish and close the CameraAccess plus app.
If necessary, disconnect the iOS/Android device from the access point.
To use the Monitor while Out function
4 While you are out, start the CameraAccess plus app.
Make sure the iOS/Android device is connected to a Wi-Fi access
point.
5 Touch Start under Monitor while Out.
6 Enter the password for the Monitor while Out function that you set
in the camcorder (step 3 of the previous procedure) and then
touch Connect.
Use the app’s onscreen controls to operate the camcorder while
viewing the live image on the device.
To end the Monitor while Out mode
On the camcorder, touch [End] to end the wireless connection and
then turn off the camcorder.
COP
Y
