Basic Shooting and Playback
37
- Do not open the memory card slot cover.
- Do not disconnect the power source or turn off the camcorder.
- Do not change the camcorder’s operating mode.
• Be sure to save your recordings regularly (
A
99), especially after mak-
ing important recordings. Canon shall not be liable for any loss or cor-
ruption of data.
NOTES
•
About the power saving mode:
If
1
>
q
>
[Auto Power Off] is set
to [
i
On], the camcorder will shut off automatically to save power
when it is powered by a battery pack and is left without any operation
for 3 minutes. Should this happen, turn the camcorder back on.
• When recording in bright places, it may be difficult to use the LCD
screen. In such cases, you can adjust the LCD backlight with the
1
>
t
>
[LCD Backlight] setting or adjust the brightness of the LCD
screen with the
1
>
t
>
[LCD Brightness] setting.
• If you plan on making a long recording while the camcorder is in a fixed
position, such as on a tripod, you can record with the LCD panel closed
in order to conserve the battery’s power. In such case, make sure
1
>
q
>
[Power On Using LCD Panel] is set to [Off].
COP
Y
