Canon    LBP3310, Service Manual

Page: 59 / 114

Chapter 3
3-1
3.1 EXTERNAL AND CONTROLS SYSTEM
3.1.1 Rear Cover
3.1.1.1 Preparation for removing the rear cover unit
0018-2603
LBP3370 / LBP3310
1) Detach the left cover.
(page 3-2)
Reference [Detaching the left cover]
2) Detach the right cover.
(page 3-1)
Reference [Detaching the right cover]
3.1.1.2 Removing the rear cover unit
0018-2604
LBP3370 / LBP3310
1) Press the lever [1] of the duplexing unit to release the duplexing unit [2].
F-3-1
2) Open the rear cover [1] .
3) Detach the rear cover unit [2] together with the duplexing unit.
- 4 screws [3]
F-3-2
4) Detach the rear cover unit [1] from the duplexing unit [2].
- 2 bosses [3]
F-3-3
3.1.2 Right Cover
3.1.2.1 Detaching the right cover
0018-2602
LBP3370 / LBP3310
1) Remove the cassette.
2) Press the release button [1] to open the front cover [2].
F-3-4
3) Repeat the steps 4) and 5) below to disengage the 3 claws [1] of the right
cover from the bottom to the top.
4) Fit the blade edge of flat-blade screwdriver to the claw [1] of the right cov-
er through the gap with the rear cover.
5) Press [A] of the rear cover to the rear direction and move down the driver
to the direction of [B] to disengage the claw [1] of the right cover.
Points to note when attaching
Lift the 2 levers [1] of the duplexing unit and press the magnets [2] on the
both ends against the main body to attach the duplexing unit [3].
[1]
[2]
[1]
[2] [2] [3]
[2]
[1]
[3]
[3]
[1]
[2]
[3]
[3]
[1]
[2]