Canon LBP312 SERIES User Manual Download Page 169

Page: 169 / 834

Making the Best Use of the Machine by Utilizing
Applications

167A-02S

You can use an appropriate application that enables you to print by operating the machine from your mobile device.

The machine supports a dedicated application from Canon and various other applications. You can select the most

appropriate application to your mobile device, the purpose, the situation, and so on.

◼

Printing via Canon PRINT Business

You can print from mobile devices that support iOS/Android. When printing, it is not necessary to perform operations

on the machine. For more information on supported operating systems, detailed setting methods, and operating

procedures, see the application's help or the Canon website (http://www.canon.com/).

◼

Printing with Canon Print Service

You can easily print from the menu of applications that support the Android print subsystem. For more information on

supported operating systems and detailed settings and procedures, see the Canon website (http://www.canon.com/).

◼

Using Google Cloud Print

You can print from an application or service that supports Google Cloud Print. You can print by remotely operating the

machine at any time and from anywhere, for example even while you are on the go. Using Google Cloud

Print(P. 172)

◼

Printing with Mopria™

This machine also supports Mopria™. Using Mopria™ allows you to print with printers of different models from

different manufacturers by using common operations and common settings. For example, assume that Mopria™

compatible printers of different models from different manufacturers are installed in your office, at your place, or at

places you are visiting. You can then print with any of those printers by using Mopria™ without the need to install the

respective dedicated applications on them. For details about the models supporting Mopria™ and the system

requirements, see http://www.mopria.org.

Can Be Used Conveniently with a Mobile Device

163

Summary of Contents for LBP312 SERIES



































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LBP312 SERIES

Reviews:

Related manuals for LBP312 SERIES

Brands by name

Popular brands

Canon LBP312 SERIES, User Manual

Search results

Summary of Contents for LBP312 SERIES

Reviews:

Related manuals for LBP312 SERIES

Brands by name

Popular brands