manualshive.com logo in svg

Canon LBP253 SM, Manual, Page: 94 / 167

Share
Download
Canon LBP253 SM Manual Download Page 94

 Remove the Power Supply

PCB

■ Preparations

1. Remove Left Cover.

“Removing the Left Cover” on

page 80

2. Remove Right Cover.

“Removing the Right Cover”

on page 80

3. Remove Rear Cover Unit.

“Removing the Rear Cover

Unit / Duplex Feed Unit” on page 81

4. Remove Main Controller Board.

“Removing the Main

Controller Board” on page 84

5. Remove Duplex Reverse Sensor Unit.

“Remove the

Duplex Reverse Sensor Unit” on page 86

6. Remove Engine Controller Board.

“Removing the

Engine Controller Board” on page 87

■ Procedure

1. Remove Power Supply PCB [1].

• 3 Connectors [2]
• 1 Screw [3]
• 1 Ring Core [4]

[1]

[2]

[3]

[2]

[4]

1x

1x

2x

 Removing the Engine

Controller Board

■ Preparations

1. Remove Left Cover.

“Removing the Left Cover” on

page 80

2. Remove Right Cover.

“Removing the Right Cover”

on page 80

3. Remove Main Controller Board.

“Removing the Main

Controller Board” on page 84

4. Remove Rear Cover Unit.

“Removing the Rear Cover

Unit / Duplex Feed Unit” on page 81

5. Remove Duplex Reverse Sensor Unit.

“Remove the

Duplex Reverse Sensor Unit” on page 86

■ Procedure

1. Remove harness guide [1].

• 2 Harness guide [1]
• 5 Connectors [3]

[1]

[2]

[3]

5x

4. Disassembly/Assembly

87

Summary of Contents for LBP253 SM








































































































































































Reviews:

No comments