Canon LBP253 SM, Manual

Page: 104 / 167

Image Forming System
Removing the Transfer Roller
■ Procedure
CAUTION:
When assembling / disassembling the transfer
charging roller, hold the shaft or bushing of the transfer
charging roller and do not touch the sponge parts.
1. Press Release Button [1] and open Front Cover Unit
[2].
2. Pinch the Holder [1] and Remove It In the Direction
Of the Arrow.
3. Remove the Transfer Roller [2] In the Direction Of the
Arrow.
[1]
[2]
Removing the Registration
Unit
■ Preparations
1. Remove Left Cover. “Removing the Left Cover” on
page 80
2. Remove Right Cover. “Removing the Right Cover”
on page 80
3. Remove Rear Cover Unit. “Removing the Rear Cover
Unit / Duplex Feed Unit” on page 81
4. Remove Upper Cover Unit. “Removing the Upper
Cover Unit” on page 82
■ Procedure
1. Remove tab [1] and gear [2].
[2]
[1]
1x
2. Lift guide [1] up to remove.
• 2 Hook [2]
[2] [1] [2]
2x
3. Remove gear cover [3] and Registration Unit [1].
• 5 Screw [2]
[1]
[2]
[2]
[2]
[2]
[3]
5x
4. Disassembly/Assembly
97