Canon Laser Shot LBP-5100, User Manual

Page: 77 / 494

Turning the Printer ON/OFF
2-38
Installing the Pr
inter
2
1
Press " " of the power switch on the printer.
Power Saving (Sleep Mode)
You can reduce power consumption efficiently by using the sleep mode when the
printer is idle or not in use. Use the sleep mode using the following procedure.
IMPORTANT
•
While " " of the power switch located on the back of the printer is pressed, the power
consumption is 0 W.
•
Since calibration is not performed automatically during the sleep state, you may not
obtain appropriate printout results when printing immediately after the sleep state is
released. In this case, perform calibration manually "Calibrating the Printer" (See p.
6-16).
NOTE
• You can select [5], [10], [15], [30], [60], [90], [120], [150], or [180] minutes for [Time to
Enter Sleep Mode]. The default value is [30] minutes. You can also configure the printer
not to enter the sleep mode.
•
The sleep mode is cleared in the following circumstances:
- Printing is performed
- Calibration is performed
- Cleaning is performed
1
Display the Printer Status Window.
For details on methods for displaying the Printer Status Window, see "Displaying
the Printer Status Window," on p. 5-92.