Canon Laser Shot LBP-5100, User Manual

Page: 44 / 494

2-5
Installing the Pr
inter
2
Installation Site
••••
Do not install the printer in unstable locations, such as unsteady platforms or
inclined floors, or in locations subject to excessive vibrations, as this may
cause the printer to fall or tip over, resulting in personal injury.
IMPORTANT
Do not install the printer in the following locations, as this may result in damage to the
printer.
- An environment where the temperature and/or humidity can change dramatically, or
where condensation occurs
- A poorly ventilated room
- A location near products that generate magnetic waves or electromagnetic waves
- In rooms such as laboratories where chemical reactions occur
- A place where salt content, corrosive gases such as ammonia, or toxic gases are
contained
- A platform that may warp from the weight of the printer and optional accessories, or the
printer is liable to sink (such as a carpet or mat)
Installation Space
Select an installation location where you can secure the following amounts of free
space around the printer, and a surface that can support the weight of the printer.
The dimensions of the space required around the components and the positions of
the feet are as follows.
Required Peripheral Space
■
Standard state
Paper cassette
Front cover
(mm)
228
180
11.5
11.5
600
1300
430
740.9
Front Surface
Top cover