manualshive.com logo in svg

Canon Laser Shot LBP-5100, Service Manual

Share
Download
Canon Laser Shot LBP-5100 Service Manual Download Page 85

Chapter 3

3-5

- 1 screw [2]

- 1 claw [3]

- 2 hook [4]

F-3-24

F-3-25

2) From the left cover, detach the left cassette cover [1].

- 2 claws [2]

F-3-26

3) From the left cover, detach the left handle [1].

- 2 screws [2]

F-3-27

3.2.4 Upper Cover

3.2.4.1 Preparation for Removing the Upper Cover

0015-7556

LBP5100

1) Remove the delivery tray. 

(page 3-7)

Reference [Removing the Delivery

Tray]

2) Detach the rear cover. 

(page 3-2)

Reference [Removing the Rear Cover]

3) Detach the right cover. 

(page 3-2)

Reference [Removing the Right Cover

/ Right Cassette Cover]

3.2.4.2 Removing the Upper Cover

0015-7557

LBP5100

1) Detach the upper cover [1].

- 1 connector [2]

F-3-28

3.2.4.3 The former procedure of  removing the Upper 

Cover

0011-0987

LBP5000

1) Remove the delivery tray. 

(page 3-7)

Reference[Removing the Delivery

Tray]
2) Remove the right cover/right cassette cover. 

(page 

3-

3)

Reference[Removing the Right Cover/Right Cassette Cover]

3.2.4.4 Removing the Upper Cover

0010-6554

LBP5000

1) Remove the upper cover [1].

- 1 connector [2]

F-3-29

3.2.5 Front Cover

3.2.5.1 Preparation for Removing the Front Cover

0015-7558

LBP5100

1) Remove the delivery tray. 

(page 3-7)

Reference [Removing the Delivery

Tray]

2) Detach the rear cover. 

(page 3-2)

Reference [Removing the Rear Cover]

3) Detach the right cover. 

(page 3-2)

Reference [Removing the Right Cover

/ Right Cassette Cover]

4) Detach the upper cover. 

(page  3-5)

Reference [Removing the Upper

Cover]

5) Detach the left cover. 

(page 3-4)

Reference [Removing the Left Cover /

Left Cassette Cover]

3.2.5.2 Removing the Front Cover

0015-7559

LBP5100

1) Return the ETB unit to the host machine.

2) Remove the boss [1], and remove the bushing [2] and the arm [3] by

rotating the bushing.

Summary of Contents for Laser Shot LBP-5100



































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands