manualshive.com logo in svg

Canon IXUS V3, User Manual

Share
Download
Canon IXUS V3 User Manual Download Page 119

116

Downloading Images to a Computer

• Setting the Communication Mode

Sets the communication mode when downloading images with a
camera connected to the computer.

Usual setting. You must install the USB driver 
bundled on the Canon Digital Camera Solution 
Disk before using this mode.

The following functions are available even if the 
software and USB driver bundled on the Canon 
Digital Camera Solution Disk have not been installed.
- Viewing the camera's images 
- Downloading the camera's images to a computer 
- Deleting the camera's images
These functions are available with Windows XP or 
Mac OS X (10.1) or later OS*.
*Select the [Normal] option for all other 

operating systems.

Normal (Default)

PTP (Picture Transfer Protocol)

*With any other OS, [PTP] cannot be used. Please select [Normal].

• See

Selecting Menus and Settings

 (p. 37)

• Use the   or   button to select

[Normal] or [PTP].

In the 

 (Set up) menu,

select

.

Check that the camera
is not connected to the
computer.

Summary of Contents for IXUS V3
























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands