Canon IXUS 85 IS User Manual Download Page 88

Page: 88 / 224

To Cancel Checking the Focus

Press the shutter button halfway.

Shoot.

•

The recorded image displays.

•

The frame displays as follows.

•

The orange frame allows you to change the display size, the
display position and the display frame

(p. 115)

Pressing the

button while the image is displayed will

erase the image

(p. 17)

. However, when the bottom right of

the image is enlarged, pressing the

button will not delete

the image.

You can also check the focus in Playback mode

(p. 114)

Recorded Image

Orange frame contents

Frame Color

Content

Orange

Displays the area of the image shown at the

bottom right

White

Displays at the focal point

Summary of Contents for IXUS 85 IS

































































































































































































































Search results

Summary of Contents for IXUS 85 IS

Reviews:

Brands by name

Popular brands

Canon IXUS 85 IS, User Manual

Search results

Summary of Contents for IXUS 85 IS

Reviews:

Brands by name

Popular brands