138
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
No AF frames are displayed and the camera does not focus when the
shutter button is pressed halfway.
•
To have AF frames displayed and the camera focus correctly, try composing the
shot with higher-contrast subject areas centered before you press the shutter button
halfway. Otherwise, try pressing the shutter button halfway repeatedly.
Subjects in shots look too dark.
•
Set the flash mode to [
h
] (
=
61
).
•
Adjust brightness by using exposure compensation (
=
52
).
•
Adjust contrast by using i-Contrast (
=
54
,
80
).
•
Use AE lock or spot metering (
=
53
).
Subjects look too bright, highlights are washed-out.
•
Set the flash mode to [
!
] (
=
33
).
•
Adjust brightness by using exposure compensation (
=
52
).
•
Use AE lock or spot metering (
=
53
).
•
Reduce the lighting on subjects.
Shots look too dark despite the flash firing (
=
29
).
•
Shoot within flash range (
=
155
).
•
Increase the ISO speed (
=
54
).
Subjects in flash shots look too bright, highlights are washed-out.
•
Shoot within flash range (
=
155
).
•
Set the flash mode to [
!
] (
=
33
).
White dots or similar image artifacts appear in flash shots.
•
This is caused by light from the flash reflecting off dust or airborne particles.
Shots look grainy.
•
Lower the ISO speed (
=
54
).
•
High ISO speeds in some shooting modes may cause grainy images (
=
43
).
Subjects are affected by red-eye (
=
36
).
•
Set [Red-Eye Lamp] to [On] (
=
39
) to activate the red-eye reduction lamp
(
=
3
) in flash shots. Note that while the red-eye reduction lamp is on (for about
one second), it is not possible to shoot, because the lamp is counteracting red-eye.
For best results, have subjects look at the red-eye reduction lamp. Also try increasing
the lighting in indoor scenes and shooting at closer range.
•
Edit images using red-eye correction (
=
80
).
Recording to the memory card takes too long, or continuous shooting
is slower.
•
Use the camera to perform low-level formatting of the memory card (
=
115
).
Shooting settings or FUNC. menu settings are not available.
•
Available setting items vary by shooting mode. Refer to “Functions Available in Each
Shooting Mode”, “FUNC. Menu”, and “Shooting Tab Menu” (
=
145
–
150
).
Shooting Movies
The elapsed time shown is incorrect, or recording is interrupted.
•
Use the camera to format the memory card, or switch to a card that supports high-
speed recording. Note that even if the elapsed time display is incorrect, the length
of movies on the memory card corresponds to the actual recording time (
=
115
,
155
).
[ ] is displayed and shooting stops automatically.
The camera’s internal memory buffer filled up as the camera could not record to the
memory card quickly enough. Try one of the following measures.
•
Use the camera to perform low-level formatting of the memory card (
=
115
).
•
Lower the image quality (
=
36
).
•
Switch to a memory card that supports high-speed recording (
=
155
).
Zooming is not possible.
•
Zooming is not possible when shooting movies in [
] mode (
=
46
).
Subjects look distorted.
•
Subjects that pass in front of the camera quickly may look distorted. This is not a
malfunction.
Summary of Contents for IXUS 265 HS
Page 17: ...16...
