Canon IXUS 245 HS User Manual Download Page 218

Page: 218 / 284

218

Adjusting Basic Camera Functions

Date and Time

Adjust the date and time as follows.

Access the [Date/Time] screen.

Touch [Date/Time].

Configure the setting.

Touch the item to configure, and then

touch [

][

] to adjust the setting.

Touch-Screen Calibration

Calibrate the touch‑screen panel if you are having difficulty choosing items

or buttons by touch. For greater calibration accuracy, always use the stylus

attached to the strap.

Touch [Calibration].

Use the stylus attached to the strap to

touch the screen where [ ] is displayed

(

18).

Following the on‑screen instructions,

touch the screen in four positions, one

after another: upper left, lower left, lower

right, and upper right.

•

Do not use pencils, pens, or sharp objects other than the included

stylus to operate the touch‑screen.

COP

Summary of Contents for IXUS 245 HS





























































































































































































































































































Search results

Summary of Contents for IXUS 245 HS

Reviews:

Related manuals for IXUS 245 HS

Brands by name

Popular brands

Canon IXUS 245 HS, User Manual

Search results

Summary of Contents for IXUS 245 HS

Reviews:

Related manuals for IXUS 245 HS

Brands by name

Popular brands